LipoLite™ Laser by Syneron: Information for Laser Lipo Physicians
Minimally invasive laser liposculpture system
Use the LipoLite™ laser lipo workstation from Syneron for laser liposculpture of the chin, jowls, neck, arms, male breast, back, abdomen, buttocks, and thighs.
Wavelength and Power
The LipoLite™ laser has a 1064nm Nd:YAG source filter and is rated for a maximum of 12 watts of power.
With SelectPulse™ (a standard feature on LipoLite™), physicians can use a variety of pulse characteristics to customize patient treatment. LipoLite™ can deliver short pulses of as low as 100 µsec with low pulse energy of <250 mJ for areas of high fibrosis, or it can deliver long pulses of up to 800 µsec with high pulse energy of up to 800 mJ to facilitate the thermal destruction of fat cells.
The LipoLite™ is approved by the FDA for laser lipolysis and for dermatological procedures requiring incision, excision, vaporization, ablation, and coagulation of soft tissue.
The LipoLite™ uses a 550 µm fiber and a 1.2 mm cannula.
The LipoLite™ laser liposculpture system allows physicians to control pulse energy, pulse length, and repetition rate, enabling them to tailor treatment according to each patient's needs. The LipoLite™ also delivers the highest peak power on the market today.
See the specification table below for technical information. All trademarks and registered trademarks are the property of their respective owners.
|Source Filter||Nd:YAG 1064 nm|
|Pulse Duration||100 - 800 µsec|
|Aiming Beam||635 nm red diode|
|Repetition Rate||up to 50 Hz|
|Variable Pulse Control||yes|
|Peak Power||800 mJ/pulse|
You can compare the LipoLite™ system with other lasers in our laser comparison table.